NVR Operation > General Setup > Screen Setup

General Setup > Screen Setup

The Screen Setup menu will allow you to configure the way the NVR’s output image displays on your monitor or television.

 

  1. OSD Alpha – Determine how transparent the NVR’s menu screens are. The lower the value, the more transparent the menus will be.
  2. VGA Resolution – Determine the output resolution of the NVR. Do not set this value higher than your television or monitor can handle.
               ⚠️ It is strongly recommended to leave the VGA Resolution setting at it’s default value, unless you’re certain of your television’s display resolution. ⚠️
  3. TV Adjust – Select the TV Adjust option to display a menu where you’re able to define the edges of your image.
  4. Auto Switch – Enables the automatic switching of channels. Select how long the channel stays on the screen, when using the slideshow mode, and skip channels which are not displaying video. 

Back to – Table of Contents

Next Page – General Setup > HDD Setup